Hot Tapping 101: The Basics

April 24, 2019 at 3:14 PM

Keeping Things Under Pressure

Repairing damaged pipelines or adding branches to a current network doesn’t have to require shutting down the full operation. This is where hot tapping comes into play.
On a basic level, hot tapping is the ability to safely tie into a pressurized system—by drilling or cutting—while the line is live. It’s used when pipeline repairs are required due to damage or corrosion, or when adding branches to modify an existing network.

A typical hot tapping connection process consists of:

  • Tapping fittings such as Uni-forge Hot Tap fittings, Reinforcing Saddles or Split Tees
  • Isolation Valves
  • A hot tapping (HT) machine which includes the cutter and housing

The Six-step Hot Tapping Process

Uni-forge Pipe fittings welded to the line

1. Weld the fitting to the line and bolt the valve to the pipe fitting.

Hot tap machine to the valve

2. Bolt the hot tap (HT) machine to the valve.

Cutting the pipe

3. Check for leaks in bolted connections by pressure testing through the cutter housing. Make sure the valve is fully open throughout the testing.

Step 5.2

4. Start cutting the pipe with the hot tap machine until the cutter passes through the pipe wall. The section of the pipe which is removed is commonly known as the “coupon.” This is normally retained on one or more u-wires, which are attached to the pilot bit.

Stopping the hot tap machine, withdrawing the cutter and closing the valve

5. Once the cutter has cut through the pipe, the hot tap machine can be stopped. Withdraw the cutter into the hot tap adapter and close the valve.

Removing the hot tap machine from the pipe

6. To remove the hot tap machine, reduce the pressure from inside the tapping adapter. The machine is then separated from the line, and a new service is established.

The Uptime Benefits of Hot Tapping

The hot tapping process can be performed on almost any type of pipe that carries fluid under pressure, ranging from carbon steel to PVC. Adding new connections to a pipeline is not the only reason for doing hot taps. Product sampling points, pressure control switch installations, inspections and draining pipes are just a few examples of hot tapping procedures. Not only is hot tapping cost efficient, but it is also a safe and effective way to keep facilities up and running during repairs and upgrades to vital infrastructure.

Trust a Quarter-century of Hot-tapping Expertise

Experience and Quality fittings are critical to the success of any successful hot tapping project. That’s why customers worldwide trust Uni-Forge specialty fittings and pipeline reinforcement solutions. Manufactured in our own facilities, every fitting uses high-grade materials and our proven extrusion processes.

Pipeline Infographics for Blog-1

To learn more about the hot tapping process and the best options for quality pipe fittings, contact the Uni-Forge team,

Contact Our Team

Topics: taptee, hottap, htls, hottapping, linestopping

Subscribe to the Pipeline Integrity blog today!

Recent Posts